Bearings for Mining & Construction Equipment
TEDIN supplies mining equipment bearings and heavy-duty bearing solutions for crushers, vibrating screens, conveyors, excavators, loaders, drilling rigs and construction machinery operating under shock loads, dust, vibration and harsh working conditions.
Mining Equipment Bearings Built for Harsh-Duty Conditions
Mining equipment and construction machinery require bearings that can operate reliably under heavy loads, shock, vibration, dust, contamination and continuous-duty working environments.
Heavy Radial & Axial Loads
Bearings must support high load capacity in crushers, conveyors, gearboxes and heavy mobile equipment.
Shock & Impact Resistance
Crushers, loaders and drilling rigs often generate sudden impact loads that require strong bearing structures.
Vibration Stability
Vibrating screens and feeders need bearings designed for stable operation under continuous vibration.
Dust & Contamination Control
Proper bearing selection, sealing and lubrication help reduce wear in dusty and abrasive environments.
Misalignment Tolerance
Spherical roller bearings help compensate for shaft deflection and mounting misalignment in heavy-duty equipment.
Long Service Life
Reliable material, heat treatment and inspection help support bearing life in continuous operation.
Where Our Bearings Are Used
TEDIN supplies mining equipment bearings and construction machinery bearings for crushers, vibrating screens, conveyors, excavators, mining trucks, drilling rigs and heavy-duty gearboxes.
Crushers
Crusher bearings for jaw crushers, cone crushers and impact crushers under heavy load and shock conditions.
- For crushing shafts, eccentric assemblies and drive positions.
- Built for shock loads, vibration and heavy radial loads.
Vibrating Screens
Vibrating screen bearings for screens, feeders and exciters operating under continuous vibration.
- For screen shafts, exciters and feeder assemblies.
- Supports vibration resistance and misalignment tolerance.
Belt Conveyors
Conveyor bearings for pulleys, rollers, drive units and gearboxes in dusty material handling systems.
- For conveyor pulleys, idlers, rollers and drives.
- Suitable for long-duty operation and contaminated sites.
Excavators & Loaders
Excavator bearings and loader bearings for slewing systems, wheel hubs, travel drives and gearboxes.
- For slewing rings, wheel hubs and transmission systems.
- Supports radial, axial and moment loads.
Mining Trucks
Mining truck bearings for wheel hubs, axle systems, drive units and heavy-duty transmissions.
- For haul trucks, dump trucks and off-highway vehicles.
- Designed for payload, impact and rough-road conditions.
Drilling Rigs & Gearboxes
Drilling rig bearings and gearbox bearings for rotary systems, reducers and power transmission units.
- For rotary systems, reducers, gearboxes and drives.
- Supports thrust loads and high-rigidity transmission.
Recommended Bearings for Mining & Construction Equipment
TEDIN provides heavy-duty bearing solutions for mining machinery, construction equipment, crushers, vibrating screens, conveyors, drilling rigs and gearboxes.
Spherical Roller Bearings
Used in crushers, vibrating screens, conveyors and heavy-duty mining equipment.
- High radial load capacity
- Misalignment tolerance
- Suitable for shock and vibration
![Cylindrical roller bearings for gearboxes and drives](/wp-content/uploads/2026/07/double-row-cylindrical-roller-bearings-tedin.webp")
Cylindrical Roller Bearings
Support high radial loads in gearboxes, drive units, crushers and construction machinery.
- High radial rigidity
- Reliable high-speed performance
- Used in gearboxes and drives
Tapered Roller Bearings
Suitable for wheel hubs, mining trucks, excavators, loaders and transmission systems.
- Handles radial and axial loads
- Good for wheel hub applications
- Suitable for heavy-duty vehicles
Thrust Roller Bearings
Used where axial load support is required in crushers, drilling rigs and heavy-duty gearboxes.
- Strong axial load capacity
- For thrust support positions
- Used in heavy-duty transmissions
Need help selecting bearings for harsh operating conditions?
Share your equipment type, load conditions, speed, operating temperature and environment. TEDIN can help recommend suitable mining and construction bearing solutions.
Bearing Selection Support for Real Working Conditions
In mining and construction equipment, bearing selection is not only about matching a part number. The working position, load direction, vibration, dust, lubrication and installation space all affect bearing life.
TEDIN helps customers review these details before recommending spherical roller bearings, cylindrical roller bearings, tapered roller bearings or thrust roller bearings for the application.
What information helps us recommend the right bearing?
Equipment type, bearing position, existing bearing model, shaft and housing size, load condition, speed, lubrication method and working environment.
Check the application position
We first confirm where the bearing is used, such as crusher shafts, vibrating screen exciters, conveyor pulleys, gearboxes or wheel hub positions.
- Equipment type and bearing location
- Original model or drawing reference
Match load direction and bearing type
Different positions may need radial load support, axial load support or combined load capacity. We help match the bearing type to the actual working load.
- Radial, axial or combined loads
- Shock load and vibration level
Review clearance, sealing and lubrication
For dusty and high-vibration sites, internal clearance, lubrication method and sealing arrangement can be as important as the bearing series itself.
- Clearance and cage requirements
- Grease, oil or external sealing conditions
Support replacement and custom needs
For maintenance and replacement projects, TEDIN can help check equivalent models and discuss non-standard sizes when standard bearings do not fit the equipment.
- Model cross reference support
- Standard and non-standard bearing options
Typical Bearing Positions in Mining & Construction Equipment
Bearing choice depends heavily on where the bearing is installed. A crusher shaft, a vibrating screen exciter and a conveyor pulley may all work in the same plant, but the load, vibration and lubrication conditions are different.
| Equipment | Common Bearing Position | Working Conditions to Check | Common Bearing Types |
|---|---|---|---|
| Jaw crushers / cone crushers | Main shaft, eccentric shaft, transmission shaft | High radial load, impact load, dust contamination, intermittent shock during crushing. |
|
| Vibrating screens | Exciter unit, screen shaft, vibrator assembly | Continuous vibration, high acceleration, heat build-up, clearance and cage requirements. |
|
| Belt conveyors | Drive pulley, tail pulley, take-up pulley, gearbox input/output | Long running hours, dust, moisture, pulley misalignment and lubrication interval. |
|
| Mining trucks / loaders | Wheel hub, axle, transmission and final drive positions | Combined radial and axial loads, low-speed heavy load, shock from road conditions. |
|
| Drilling rigs | Rotary drive, feed mechanism, gearbox and thrust support | Axial load, vibration, contamination from site conditions and limited maintenance access. |
|
| Industrial gearboxes | Input shaft, intermediate shaft, output shaft | Shaft speed, gear load direction, oil lubrication, operating temperature and housing fit. |
|
Replacing an existing bearing?
Send us the bearing model, equipment position, shaft size, housing size or photos of the old bearing. TEDIN can help check possible equivalent options before quotation.
From Bearing Model to Delivery
For replacement and project orders, TEDIN helps customers move from a bearing number, drawing or equipment position to a confirmed supply option with practical checks along the way.
Identify the bearing
We start with the bearing model, old bearing photos, nameplate, drawing number or installation position.
Check key details
Dimensions, structure, clearance, cage type, sealing and load direction are reviewed when needed.
Confirm supply option
We check available TEDIN bearings or possible equivalent options for maintenance and project orders.
Pack and ship
Bearings can be packed for export shipment with protection against moisture and handling damage.
What to send when asking for a quote
A clear model number is helpful, but not always enough for heavy-duty equipment. These details can reduce back-and-forth communication.
- Bearing model or marking on the old bearing
- Inside diameter, outside diameter and width
- Equipment name and bearing position
- Required quantity and expected delivery time
- Photos, drawings or previous purchase records
If the model is unclear, send photos or dimensions first.
Send Bearing DetailsQuestions About Bearings in Mining & Construction Equipment
Bearings used in crushers, vibrating screens, conveyors, trucks and construction machinery work under heavy load, shock, dust and outdoor conditions. These questions focus on typical application issues rather than only bearing model selection.
Why do bearings fail early in mining and construction equipment?
Early failure is often related to dust contamination, shock load, poor lubrication, misalignment, water ingress or incorrect installation. In heavy-duty equipment, the bearing itself is only one part of the system; sealing, grease condition and mounting accuracy also affect service life.
Which bearing types are commonly used in crushers?
Crushers usually need bearings that can handle heavy radial load, impact and possible shaft deflection. Spherical roller bearings are widely used in crusher applications, while cylindrical roller bearings or tapered roller bearings may be used in certain shaft and gearbox positions.
What should be considered for vibrating screen bearings?
Vibrating screen bearings work with continuous vibration and high acceleration. Internal clearance, cage strength, lubrication, heat dissipation and fitting tolerance should be reviewed carefully. In many vibrating screen applications, spherical roller bearings are commonly used because they can accommodate heavy radial load and certain misalignment.
What bearings are used in conveyor pulleys and rollers?
Conveyor pulleys and rollers often use spherical roller bearings, deep groove ball bearings or other rolling bearings depending on load and size. For mining conveyors, attention should be paid to dust sealing, alignment, grease retention and long running hours.
How do dust, mud and water affect bearing service life?
Dust and mud can enter the bearing or housing and cause abrasive wear. Water may reduce grease performance and lead to corrosion. Once the lubrication film is damaged, rolling elements and raceways wear faster, which may result in noise, heat and unexpected shutdown.
How can bearing life be improved in heavy-duty equipment?
Bearing life can usually be improved by choosing the correct bearing type, using proper clearance, improving sealing, applying suitable lubrication, controlling installation accuracy and checking temperature or vibration during maintenance. A more expensive bearing alone may not solve problems caused by contamination or poor mounting.
Need Bearings for Mining or Construction Equipment?
Send your bearing model, equipment position, drawing or photos. TEDIN can help check suitable bearing options for crushers, vibrating screens, conveyors, trucks, gearboxes and other heavy-duty equipment.
Helpful details to include
- Bearing model or marking on the old bearing
- Equipment name and bearing position
- Inside diameter, outside diameter and width
- Required quantity and delivery schedule
- Photos, drawings or previous purchase records
If the bearing number is unclear, photos and basic dimensions are enough for the first check.