Blog Category
Bearing application articles for gearboxes, rolling mills, mining equipment, cement plants, machine tools, oil & gas, agricultural, and other industrial machinery.
Explore the latest technical guides and application insights from TEDIN Bearings.
Rolling mill bearing selection requires checking the bearing position, radial and axial loads, operating speed, fits, clearance or setting, and lubrication arrangement. Start by identifying how the roll
When comparing OEM vs. aftermarket cone crusher bearings, check what each quotation actually includes. The same part reference does not necessarily mean the same supply scope, inspection records
Jaw crusher bearing selection starts with the bearing position. Confirm whether the bearing supports the eccentric shaft in the main frame, connects the shaft to the moving jaw
Vibrating screen bearing selection requires more than matching dimensions and load ratings. Start with the exciter arrangement and the reactions at each bearing, then check vibratory-duty suitability, operating
A conveyor pulley bearing is running hotter than usual. Should you add grease, reduce the load or stop the conveyor? The temperature alone cannot answer that. First identify
A vibrating screen bearing rarely fails for just one reason. Lubrication, contamination, mounting, operating conditions and problems elsewhere in the screen can all play a part. If the
A crusher bearing replacement can be wasted effort if the reason for the original failure is left in place. Before fitting a new bearing, check the shaft seat,
A crusher bearing running hot can point to a lubrication or installation problem, but temperature alone does not confirm bearing failure. Check when the temperature started rising, whether
More runout, tighter rotation, or unexpected heat after installation does not always mean a faulty bearing. Mounting faces, fits, bolt clamping, and lubrication should be checked first. This
Rotary table bearing selection depends on loads, speed, stiffness and mounting conditions—not just bearing size. The support must carry the rotating assembly while limiting deflection and maintaining suitable
